Installation guide

Double-check dishwasher
lignment in cabinet opening
Check that dishwasher is still level front-to-back and side-to-side
in cabinet opening.
Remove lower dish rack
and place towel
WE
eat
saree
LIS
Ze
Open dishwasher door, remove lower dish rack, and place towel
over pump assembly and lower spray arm of dishwasher. This will
keep screws from falling into pump area when securing
dishwasher to countertop.
‘3 | Secure dishwasher
se
screw to
side cabin
NOTES:
m Do not drop screws into bottom of dishwasher.
g_ lf side mounting, you must drill pilot holes in cabinet to avoid
splitting the wood before installing screws.
Locate brackets on top of dishwasher and secure dishwasher to
countertop with two #10 x 1%" Phillips-head screws (included). The
dishwasher must be secured to keep it from shifting when door is
opened.
22
x
Ye
or
afi
Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
5 | Check inner spacing
QS 4
~
[
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws secured and shift tub. Tighten bracket
screws.
Check side attachment
plastic
button
je
If securing with a side attachment, check that sides of door do not
rub against the screw heads. If they do, dishwasher must be
re-centered. When dishwasher is properly centered, replace
plastic buttons.