Quick Reference Guide

ManualsBrandsJenn-Air ManualsAppliancesNOIR Series 36 Inch Dual Fuel Natural Gas Freestanding Range, in Stainless Steel

TONES

WIFI CONNECTIVITY

A tone will sound when:

• The unit is powered on

• The unit switches to off mode

• A valid mode and temperature selection

has been made and the Start button is

pressed to begin a cycle

• An invalid Start button selection is made

• There is an error with the unit

• Preheating has been completed

• The timer from the app has ended

(the tone will sound every ve minutes

until the timer is stopped)

• A WiFi event is occurring

• The Meat probe connects/disconnects

WiFi Connectivity and Remote Operation

Models are provided with a WiFi module that allows the unit to

be remotely operated. The control is capable of monitoring and

performing remote operations once the remote enabling function

sequence is properly initiated at the appliance.

Download the App

The rst step to get your appliance connected is to download the

app on your mobile device. The app will be your guide and walk

you through all of the steps. Download the app by visiting

Google Play or iTunes.

To connect your appliance:

1. Follow the prompts in the app to create an account.

2. Locate SAID Label, refer to right side of front frame.

For more information on WiFi Connectivity, reference the

Use and Care Guide.

FUNCTION USE & LIGHT BEHAVIOR

Start Button The Start button will ash white after 2 seconds to prompt the user to press start after the mode

and temperature have been selected. If no action is taken after 2 minutes, a tone will sound

and the unit will timeout and return to idle mode. To exit idle mode, re-select a mode

and temperature before pressing start.

If an invalid knob combination has been chosen and the Start button is pressed, the indicator

light will quickly blink and a tone will sound to indicate that the chosen selection is invalid.

See the functions table for valid selections. Set mode and temperature knobs to desired

selection. The Start button will blink white when ready. Press the Start button to begin cycle.

WiFi Indicator Light The WiFi indicator light illuminates white when the unit is WiFi enabled.

All lights will turn off in Idle mode.

Remote

Indicator Light

The Remote indicator light illuminates white when the unit is remote enabled.

All lights will turn off in Idle mode.

Temp/Mode Knob

Indicator Light

When a temp or setting is selected, and the mode is valid, the temp/mode indicator

lights will illuminate white. When the Start button has been pressed, the knob indicator

light will turn white and pulse until preheat is completed. The light will turn solid white and a

tone will sound when preheat is complete. If there is no preheat for a cycle, the preheat

completes immediately and the light turns solid white.

If an invalid mode and temperature combination has been selected, the knob light will quickly

blink and a tone will sound prompting the user to select a valid combination. The indicator light

will continue to blink and a tone will sound every 30 seconds until the error is xed or timeout

after 2 minutes of inactivity.

The temperature knob will blink amber if the oven is too hot to proof or if a 100+ degree

decrease in temperature is in progress i.e. changing from Bake 450 to Bake 350.

Griddle Cooktop

On Light

Right Griddle indicator light - The Griddle Cooktop On light illuminates blue

when the griddle knob is powered on.

Griddle Preheat

Light

Left Griddle indicator light - The griddle Preheat light ashes blue while the griddle is

preheating. Once preheat temperature has been reached, the indicator light turns solid blue.

LIGHT INDICATORS AND BEHAVIORS

W11177312A JC180052