Dimension Guide

JENN-AIR
®
DETAILED PLANNING DIMENSIONSJENN-AIR
®
DETAILED PLANNING DIMENSIONS
2 of 3
8560CdZw815
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved.
D* G
E
A
B
B
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
I**
K
J**
E
C
e
BB
H
F
H
Side
Cabinet
A
D*
G
I**
K
J**
E
C
e
BB
H
F
H
Side
Cabinet
A
MODEL # JEC4430B
in cm
A
Width of combustible area above
cooking surface (min.)
30 76.2
B
Width from cooktop to fixed wall or
other combustible material (min.)
1 2.5
C
Width to outer edge of outlet (max.) 9 23.0
D*
Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.)
30
76.2
E
Height to bottom of uncovered wood or
metal cabinet (min.)
18 45.7
F
Height to top edge of outlet (min.) 7 17.8
G
Depth of upper cabinet 13
33.0
H
Depth from cutout to wall (min.) 1 2.5
I
Width of cutout (recommended) 29
1
⁄2 74.9
J
Depth of cutout (recommended) 20
1
⁄2 52.0
K
Depth from cutout to front of countertop 2
5
⁄8 6.7
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than
1
⁄4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
OPENING/CLEARANCE DIMENSIONS
FRONT VIEW
TOP VIEWSIDE VIEW
30" ELECTRIC RADIANT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JEC4430BS – 31" x 5
5
⁄16" x 22
3
⁄16"
JEC4430BB – 30
7
⁄8" x 5
5
⁄16" x 21
11
⁄16"
ELECTRICAL REQUIREMENTS
A 3-wire or 4-wire, single phase, 120/240 volt, 60 Hz., AC only electrical
supply is required on a separate, 40-amp circuit fused on both sides of
the line. 48" (121.9 cm) of
1
⁄2" (1.3 cm) I.D. flexible cable is provided.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout.
• If cabinet has a drawer, allow a 5
1
⁄2" (14.0 cm) minimum clearance
between countertop and top of drawer.
COOKTOP OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
• For approved model number combinations, refer to the under counter
label on the bottom of the cooktop burner box.
• To install a cooktop over a single wall oven, refer to page 3.