Manual

OvEN Door Ov:sN W s }ow
- NEVER place excessiveweight on
or standon anopen oven door, This
could cause the range to tip over,
break the door. or injure the user.
° NEVER attempt to open or dose
door or operate oven undl door is
properly replaced.
. NEVER place fingers between hinge
and front oven frame. Hinge arms
are spring mounted. If accidentally
hit. the hinge wiil siam shut against
oven frame and could inlure ),our
fingers,
TO REMOVE:
1. When cool, open the oven door to the
broil stop position (opened about four
inches).
2. Grasp door at each side. Do not usethe
door handle to lift door.
3. Lift up evenly until door clears hinge
arms.
TO REPLACE:
1° Grasp door at each side.
2. Align slots in the door with the hinge
arms on the range.
3. Slidethe door down onto the hingearms
until the door is completely seatedonthe
hinges.Pushdown on the top corners of
the door to completely seat door on
hinges.Door should not appearcrooked.
NOTE: The oven door on a new rangemay
fed "spongy" when it isclosed.This isnormal
andwii[ decreasewith use.
TO PROTECT THE OVEN DOOR
W_NDOW:
1. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
2 Do not dose the oven door until the
oven racks are in place.
Scratching, hitting, jarring or stressingthe
glassmay weaken its structure causingan
increasedrisk of breakageat a hter date.
L:gV:E:MN(; L:E(:;5
• Be sure the anti-tip bracket secures one
of the rear leveling legs to the floor. This
bracket prevents the range from acciden-
The rangeshouldbe leveledwhen installed.
[f the range is not level, turn the plastic
leveling legs,located at eachcorner of the
range, until range is [evek
_ANTI- AOKET
\ LEVELING LEG
Ov:gN
To assure _:heproper replacement: bulb
is used, order bulb from Maytag
Customer Service. Call 1-800-688-8408,
ask for part number 74004458- halogen
bulb.
• Disconnect power tO rangebefore
rep!ac!nglight bu[b,
' Nake sure bulb cover and bulb are
Coo[before touching.
TO REPLACE OVEN UGNT BULB:
1°When oven is cool use fingertips to
grasp edge of bulb cover. Pull out and
remove.
2_
3.
Carefully remove old bulb by pulling
straight out of ceramic base.
To avoid damagingor decreasingthe life
of the new bulb, do not touch the bulb
with bare hands or fingers. Hold with a
cloth or paper towel. Push new bulb
prongs straight into sinai[ holes of
ceramic base.
4, Replace bulb cover by snapping into
place.
S. Reconnect power to the range. Reset
ciock.
?(,)RAGE..... D:RAWER
The storage drawer at the bottom of the
range is safe and convenient for storing
metal andglasscookware. DO NOT store
piastk, paperware, food or flammable ma-
terial in this drawer. Remove drawer to
clean under range.
To remove: Empty drawer then pui[ out
to the first stop position. Lift up front of
drawer and pui[ to the second stop posi-
tion. Grasp sides and lift up and out to
remove drawer.
To replace: Fit the ends of the drawer
glides onto the rails. Lift up drawer front
andgendy pushin to first stop position. Lift
up and continue to slide drawer to the
dosed position.
[7