Range User Manual

Stop Time/Cook Time
Use to program the oven to start and stop automatically.
1. Press Bake or Convect Bake pad. Press the appropriate
number pads for desired temperature.
2. Press Cook Time pad. Press the appropriate number pads
to enter cooking time in hours and minutes.
3. To delay the start of cooking, press Stop Time pad. Press
the appropriate number pads to enter the time you want the
oven to stop.
See page 15-16 for additional information.
Drying (select models)
Use to dry or dehydrate foods such as fruits, vegetables and
herbs.
1. Press Drying pad.
2. Press Preset (0) pad for 140°F or the appropriate number
pads for the drying temperature desired.
See page 16-17 for additional information.
Controls at a Glance
Setting the Timer
Use to set and then signal the completion of a time period up
to 99 hours and 59 minutes.
The timer can be used independently of any other oven
activity and can be set while another oven function is operat-
ing. The timer does not control the oven.
1. Press Timer pad.
• The indicator word TIMER will flash and "0Hr:00"
appears in the display.
2. Press the appropriate number pads until the desired num-
ber of minutes or hours and minutes appear in the display.
Example: To set the Timer for 5 minutes, press the Timer
pad and the number 5 pad. The control will begin count-
down after a four second delay.
Setting the Clock
I. Press Clock pad.
• The indicator word TIME will flash in the display.
2. Press the appropriate number pads until the correct time of
day appears in the display,
When electrical power is supplied or after a power interrup-
tion, the last clock time, before power was interrupted, will
flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for clock controlled cooking, self-clean or
delayed self-clean.
.
4.
Example: To set the Timer for 1 hour and 30 minutes,
press the Timer pad and the numbers 1,3,0 pads. The
control will begin countdown after a four second delay.
The last minute of the countdown will be displayed as
seconds.
At the end of the time set, the timer will beep and "End"
will appear in the display. To change the number of timer
beeps and add reminder beeps, see page 7.
To cancel:
1. Press and hold Timer pad for three seconds, The time of
day will reappear.
OR
2. Press the Timer pad and the "0" number pad. After a
slight delay the time of day will reappear.
NOTE: Pressing Stop/Clear pad to cancel the timer will
cancel ALL selected oven fimctions except the timer.