Installation Instructions

31
4. Remove the oven bake burner screws and oven bake burner.
Rotate burner 90° to the left, and gently lay on its side.
5. Lift up clip on the oven bake burner electrode bracket with a
nger or at-blade screwdriver, and pull away the electrode.
6. Pull electrode out of bracket.
7. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orice spud, then remove by turning the
gas orice spud counterclockwise and lifting out. Set gas
orice spud aside.
8. Gas orice studs are stamped with a letter and a number.
Install the Number 189 oven bake burner orice spud.
9. Place Propane gas orice in plastic parts bag for future use,
and keep with package containing literature.
A
B
D C
A. Oven bake burner screws
B. Oven bake burner
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Grasp electrode here.
B. Bracket
A
A. Gas orice spud