Manual

]9 Maintenance
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Oven Door Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
To remove:
1. When cool, open the oven door to the first stop position Oven Light
(opened about four inches).
2. Grasp door at each side. Do not use the door handle to lift
door.
3. Lift up evenly until door clears hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots inthe door with the
hinge arms on the oven.
3. Slide the door down onto the
hingearmsuntilthedoor iscom-
pletely seated on the hinges. To replace oven light bulb:
Push down on the top corners of the door to completely 1. When oven is cool, hold bulb cover in place, then slide
seat door on hinges. Door should not appear crooked, wire retainer off cover.
BULB COVER
NOTE: The oven door on a new wall oven may feel NOTE:Bulbcoverwillfall
"spongy" when it is closed. This is normal and will if not held in place while J/_/"_ " "_
decrease with use. removing wire retainer. /_/" _,o ,_--_ ]
2. Remove bulb cover and I
light bulb. RErA,NEvW,AER
3. Replace with a 40 watt appliance bulb.
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to wall oven. Reset clock.