Manual

OVENCO ING
1.
2.
.
Bake
Pressthe Bake pad. ..............................................................
* BAKE and 000 will flash in the display. ( Autoset "_
/
Select the oven temperature. Press the " '
Autoset pad for 350° F or the appropriate number pads.
* Each additional press of the Autoset pad will increase
the temperature by 25°.
The oven temperature can be set from 170° to 550°.
Press Bake pad again or wait four seconds.
BAKEwill stop flashing and light in the display.
4.
5.
6.
7.
.
100° or the actual oven temperature ifover 100° Fwill
display. It will rise in 5° incrementsuntil the preset
temperature isreached.
Preheating will take approximately four minutes. Wait until
oven is preheated to add food.
When the set oven temperature is reached, one long
beep will sound.
The set temperature will display.
To recall set temperature during preheat, press Bake pad.
Place food in the oven.
Check cooking progress at the minimum cooking time.
Cook longer if needed.
When cooking is finished, press ...................................
CANCEL pad. t'CANCEL,
Remove food from the oven.
Baking Notes:
To change the oven temperature during cooking, press
Bake, then press the Autoset or appropriate number pads
until the desired temperature is displayed.
To change the oven temperature during preheat, press the
Bake pad twice, then press the Autoset pad or appropriate
number pads until the desired temperature is displayed.
If you forget to turn off the oven, it will automatically turn
off at the end of 12 hours. If you wish to deactivate this
feature, see page 10.
Baking Differences Between Your Old
and New Oven
It is normal to notice some baking time differences between a
new oven and an old one. See"Adjusting the OvenTemperature"
on page 11.
Cook & Hold
When using the Cook & Hold option, the oven begins to heat
immediatelyafter the control has been set. Then, the oven
cooks for a specified length of time. When that time has
elapsed, the oven will keep the food warm for up to an hour
then automatically turn off.
To set Cook & Hold:
1. Press the Cook & Hold pad.
HOLDwill flash to indicatethat you are in
Cook & Hold programming.
2.
Cook &
Hold
* 00:00 will flash in the display.
Select the amount of time you want to cook by using the
number pads.
* HOLD continues to flash.
.
The time will light in the display.
Time can be set from ten minutes (00:10[ to
eleven hours, 59 minutes (11:59[.
PressBake pad and select the oven tempera-
ture. Pressthe Autoset pad for 350° F or the
appropriate number pads.
* BAKEwill flash.
Bake
\
The oven temperature can be set from
cont.
6