Tech Sheet

FOR SERVICE TECHNICIAN’S USE ONLY

15. Plug in oven or reconnect power.

16. Verify operation is normal. Enter the Diagnostics menu, select “Error

Diagnostics,” and clear thehistory.

FAILURE ERROR LIKELY FAILURE CONDITION

Keypad

E0 Keypad disconnected

E1 Stuck/Shorted keypad

SUGGESTED CORRECTIVE ACTION PROCEDURE

NOTE: Before starting any test, cycle power to the oven(power off, wait 10

seconds, and power on).

PROCEDURE: Before proceeding, verify the error codeby entering the

Diagnostics mode and selecting “Error Diagnostics.”

1. Unplug oven or disconnect power.

2. Check that connectors J4, J5, J6, and J7 are rmly connected. If they are

not, go to Step 3. If they are, go to Step 6.

3. Reconnect any loose connectors.

4. Reassemble all parts and panels before operating.

5. Plug in oven or reconnect power. If the failure is gone, go to Step 9. If the

failure is still present, unplug oven or disconnect power.

6. Replace the Control Panel Assembly.

7. Reassemble all parts and panels before operating.

8. Follow the on-screen prompts to select the model number.

9. Verify operation is normal. Enter the Diagnostics menu, select “Error

Diagnostics,” and clear the history. If the Control Panel Assembly was

replaced, there is no need to clear the error history.

HMI Right

J7J5

J15

User Interface

J4J6

HMI Left

1 2 3 4

Control Panel Assembly

Speaker