Tech Sheet

FOR SERVICE TECHNICIAN’S USE ONLY

15. Replace all parts and panels before operating.

16. Plug in oven or reconnect power.

17. Enter into Diagnostics mode and verify that fan speed is running within

oven. (High speed: 1000-3300, Low speed: 400-3000)

Once Fan Speed is completed, navigate back to the activation list and

activate the Cooling Fan High Speed and return to “More Information” screen

for fan speed.

FAILURE ERROR LIKELY FAILURE CONDITION

F9 E0 Product not wired correctly

SUGGESTED CORRECTIVE ACTION PROCEDURE

NOTE: Before starting any test, cycle power to the oven(power off, wait 10

seconds, and power on).

PROCEDURE: Before proceeding, verify the error codeby entering the

Diagnostics mode and selecting “Error Diagnostics.”

1. Unplug oven or disconnect power.

2. Access the electrical wiring from the house power supply to the oven.

3. Check house wiring to the product. Check to see ifthe neutral connection

is switched with L1 or L2(refer to the installation instructions for

productwiring).

4. Reassemble all parts and panels before operating.

5. Plug in oven or reconnect power.

6. Verify operation is normal by running a cooking function. Enter

Diagnostics mode, select “Error Diagnostics,” and clear the history.

GY/BK

HS Cooling Fan

LS Cooling Fan

Convect Fan

Motor Door Latch

Hall Effect

Sensor

(Cooling Fan)

Copernicus

Appliance

Manager

GY GY

GN GN