Tech Sheet

5
General Procedure: Component Activation
1. Plug in oven or connect power.
2. Enter Diagnostics mode.
3. Touch or scroll to “Component Activation” in the Diagnostics menu, and
then touch “OK.”
4. Touching the following selections will activate/ deactivate corresponding
relay.
Selection Relay
MW Light MW Light Relay
MW Turntable MW Turntable Relay
MW Cooling Fan MW Cooling Fan Relay
MW Grill MW Broil Element Relay
MW Convection Element MW Convection ElementRelay
MW Convection Fan MW Convection fan Relay
MW Magnetron/Cooling Fan
MW Magnetron and MWCooling Fan
Relay
Oven Bake Element Oven Bake Element Relay
Oven Broil Element Oven Broil Element Relay
Oven Convection Element Oven Convection ElementRelay
Oven Convection Fan Oven Convection Fan Relay
Oven Cooling FanHigh Speed Oven Cooling Fan High-SpeedRelay
Oven Cooling FanLowSpeed Oven Cooling Fan Low-SpeedRelay
Oven Light Oven Light Relay
Oven Door LatchMotor Oven Door Latch Motor Relay
General Procedure: Sensors & Switches
NOTE: This procedure is to view the current status of oven switches and
sensor readings.
Display Status
MW Door Switch Open or Closed
MW Cavity Temp Degrees in Celsius
Oven Door Switch Open or Closed
Oven Latch Switch Open or Closed
Oven Cavity Temp Degrees in Celsius
Oven Meat Probe Temp Degrees in Celsius
1. Plug in oven or connect power.
2. Enter Diagnostics mode.
3. Touch or scroll to “Sensors & Switches” in the Diagnostics menu, and
then touch “OK.”
4. Touch or scroll through the Sensors & Switches menu to view the desired
status.
NOTE: Touching “Back” will return the display to the main Diagnostics
menu.