Tech Sheet

FOR SERVICE TECHNICIAN’S USE ONLY
6
General Procedure: System Information
NOTE: This procedure is to view the following system information:
System Information Display
Model # Model Information
Serial # Product Serial Number
UI Serial # User Interface Serial Number
Oven ACU Serial # Appliance Control UnitSerialNumber
UI Version User Interface Software Version
HMI Central SW HMI Central Board SoftwareVersion
HMI Left SW HMI Left Keyboard SoftwareVersion
HMI Left EE HMI Left Keyboard EEPROMVersion
HMI Right SW HMI Right Keyboard SoftwareVersion
HMI Right EE HMI Right Keyboard EEPROMVersion
Kernel Version HMI Central Board SoftwareVersion
Touch Calibration Version LCD/TP FPC Tail SoftwareVersion
Database Version HMI Central Board DatabaseStructure
Audio Version HMI Central Board SoftwareVersion
Oven ACU SW
Oven Appliance Control UnitSoftware
Version
MWO ACU SW
Microwave Oven Appliance Control
Unit Software Version
Diagnostics Entries
Number of times Diagnostics menu has
been entered.
1. Plug in oven or connect power.
2. Enter Diagnostics mode.
3. Touch or scroll to “System Information” in the Diagnostics menu, and
then touch “OK.”
4. Touch or scroll through the System Information menu to view the desired
status.
NOTE: Touching “Back” will return the display to the main Diagnostics
menu.
General Procedure: Model Selection
NOTE: When a new User Interface (UI) is installed, you will beprompted to
select a new model number upon power-up. To change the model number on
an existing UI,follow the steps below.
1. Plug in oven or connect power.
2. Enter Diagnostics mode.
3. Touch or scroll to “System Information” in theDiagnostics menu, and
then touch “OK.”
4. Touch or scroll to “Model Number,” and then touch“OK.”
5. Touch or scroll to the correct model number inthelist, and then touch
“Select.”