Flush Kit Installation Instructions

2
Table of Contents/Table des matières
BUILT-IN OVEN SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■ Phillips screwdriver
■ Measuring tape
■ Drill (for wall cabinet installations)
■ 1/8" (3 mm) drill bit (for wall cabinet installations)
■ Level
■ Flat-blade screwdriver
Parts Needed
■ (4) #8-14 x 1" (2.5 cm) screws
■ (2) #8-18 x 3/8" (9.5 mm) screws - bottom vent included with
built-in oven
■ Bottom vent included with built-in oven.
BUILT-IN OVEN SAFETY ................................................................2
INSTALLATION REQUIREMENTS ................................................. 2
Tools and Parts .............................................................................2
Location Requirements ................................................................3
INSTALLATION INSTRUCTIONS ................................................... 4
Prepare Built-In Microwave/Oven Combination ..........................4
Remove Oven Door ...................................................................... 4
Replace Oven Door ......................................................................5
Positioning Oven Feet .................................................................6
Replace Plastic Spacers ..............................................................7
Install Oven ................................................................................... 7
Install Deector Kit Bracket .........................................................8
Complete Installation ...................................................................8
SÉCURITÉ DU FOUR ENCASTRÉ ................................................9
EXIGENCES D’INSTALLATION .....................................................9
Outillage et pièces ........................................................................ 9
Exigences d’emplacement ...........................................................9
INSTRUCTIONS D’INSTALLATION .............................................11
Préparation de l’ensemble des fours
encastrés (micro-ondes/four) .....................................................11
Dépose la porte(s) du four..........................................................11
Réinstallation la porte(s) du four ................................................12
Positionnement des pieds du four .............................................13
Remplacement des cales d’espacement
en plastique ................................................................................14
Installation du four ......................................................................14
Installation du support de la trousse du déecteur ...................14
Achever l’installation ..................................................................15
06-May-2019 13:38:42 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")