Refrigerator User Manual

Other Hints On Caring
For Your Refrigerator
[Replacing Light Bulbs ]
it is recommended that you disconnect the power cordbefore replacing lightbulb:
To replace the upper refrigerator light bulb: (t) grasp the lightshield nearthe ends an
pull out until the shield pulls free of the retainer lugs; (2) unscrew bulb and replace wil
a 40 watt appliance bulb (60 watt appliance bulb for Model JRS207, JRSD2250 ar
JRSD2450); and (3) hook the light shield over the upper retainer lugs and press in ;
the bottom until the shield snaps in place.
To replace the lower refrigerator light bulb on some models: (1) remove the Ten-
Control Drawer; (2)using two hands, spread the top adbottom of the light shieldver_ica
away from each other and pull to the front to remove; (3) unscrew the bulb and repla,
it with a 40 watt showcase bulb; (4) using two hands, spread the top and bottom of tl
lightshield and push itinto place engaging tabsin slots;and (5)replace the Temp ContJ
Drawer.
To replace the freezer light bulb: (1) remove the ice cube dispenser bin and the t_
freezer shelf; (2) unhook the tabs on the top of the light shield by pressing in with yo
thumb onthe center top of the light shield; (3)pivot the shield down; (4) unscrew the b,
when it is cool and replace it with a standard 40 watt appliance bulb; (5) pivot the shi
up into place, snapping the tabs into the slots: (6) replace the freezer shelf and the
cube dispenser bin.
LGoing On Vacation ]
If you will be gone for a month or less, leave the control knob at its usual setting.
During longer absences, {a) remove all food, (b) disconnect from electrical outlet,
clean the refrigerator thoroughly, including defrost pan, (d) leavedoors open to pre_
odor formation, and e) turn off water supply to ice maker, if practical
16