Manual

CONTROLS & FEATURES
CONTROLS:FILTERCHANGEINDICATOR(CARBONFILTERS)
Filter Change Reminder (Carbon, if fitted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of
CarbonFilters to purify exhaust and fumes from cooking, then re-circulate the air within the home=
These Carbon Filtersare required to be replaced after every 120 hours of use=The Filter Change
Reminder function in the microprocessor needs to be switched on=The micropro_ssor in the
controls when set, will elapse and count usage time and indicate by a flashing _- when carbon
filter replacement is needed=
Setting the Filter Change Reminder:
When Off, hold _) for approx. 5 seconds.
The display will change from _}
(exhaust mode) to _, (purifying mode/
carbon filters used)this indicates that the
elapse timer function is switched on and
CarbonFilters are used.
Filter Replace indicator:
When the display _ starts flashing, the
CarbonFilters require r' eplacement.
Re-setting Function:
Oncefilters are replaced, with hood off,
press and hold (_, the display will appear;
hold for approximately 5 seconds until
on display disappears 0 .The Filter
ChangeReminder is now re-set and a new
120 hours elapse cycle is initiated.
hotd 5 sees.
display from <=o>to <C>
hold 5 sees. display from <C> to < >
¢ 0