Manual

6. Install cleaned or replacement filter. Push charcoal filter
handles in and push filter into motor housing frame. Release
handles.
1. Disconnect power.
2. Use a flat-blade screwdriver and gently pry the light cover
loose.
Replacing a Halogen Lamp
Turn off the range hood and allow the halogen lamp to cool. To
avoid damage or decreasing the life of the new bulb, do not
touch bulb with bare fingers. Replace bulb, using tissue or
wearing cotton gloves to handle bulb.
If new lights do not operate, make sure the lamps are inserted
correctly before calling service.
3. Remove the lamp and replace with a 12-volt, 20-watt
maximum, halogen lamp made for a G-4 base.
4. Replace the light cover.
5. Reconnect power.
WIRING DIAGRAM
GND L N
Electronic User interface
CON2
Electronic Power Board
N L NL NM
P1 P2_P4A P3 P4
CON3 I
w
BK
Y
BU
CON1
LA S4 S3 S2 Sl
P5 P9 P8 P7 P6
I
Illl CON4
CON7
BR
Y/G
CON 6
CON 5
L
m
12