Manual

Control Knobs
The knobs on the control panel can be removed with the controls in the Off position. Pull
each knob straight from the shaft. Wash knobs in warm soapy water or dishwasher; do
not use abrasive cleansers or materials. To replace each knob, match flat part of knob
opening with the fiat of the shaft, returning in Off position. Important: Never use a metal
blade to pry knob off.
Control Panel Area and Clock Display Window
Wipe with paper towels dampened with soapy water or glass cleaner. Do not spray any
cleaning solutions directly onto the Display window or use large amounts of soap and
water. Do not scrub with S.O.S pads or abrasive cleansers,
Glass Window
Use any suitable glass cleaner or soapy water. Do not use excessive amounts of
water which may seep behind the glass, Do not use abrasive cleaning agents.
Igniters
• It is important to keep igniter port openings on burners clear and free of obstructions
to avoid ignition failure and possible gas buildup. If the port openings are blocked,
use a toothpick to remove food particles.
• The igniter cap and stem can be cleaned with warm soapy water and a plastic
scrubber. The wire electrode inside the cap can be cleaned with a small brush.
Rinse and dry.
Surface Burner Assembly
The surface burner assembly can be cleaned with mild detergents and a ptastic
scrubber, or washed in the dishwasher. To prevent scratching the burner heads, do not
use abrasive cleansers or scrubbing pads. Do NOTclean in a self-clean oven.
Note: Check to be sure all ports are open. To open clogged ports, insert a toothpick
directly into each port.
Although the burner grate is durable, it will gradually lose its shine and/or discolor,
regardless of the care you take of it. This is due to its exposure to the high temperature
of the gas flames.
To preserve the porcelain enamet finish as long as possible, have a pan on the grate
before you turn on the burner, and lower the flame when food reaches the desired
cooking temperature.
46