Manual
Check the following list to be sure a service call is really necessary, A quick reference
of this manua_ may prevent an unneeded service caE
If grill or surface burner fails to light:
• check to be sure unit is properly connected to power supply,
• check for a btown circuit fuse or a tripped main circuit breaker,
• check to be sure burner ports or ignition ports are not clogged.
• check to be sure igniter is clicking. If igniter doesn't click, turn control knob Off and
clean iginitor. (See p. 46,)
• check to be sure appliance regulator is set for correct fuel. (See installation
instructions.)
• check to be sure inlet pressure is adequate, (Ca!L gas company.)
If the flame is uneven:
• burner ports may be clogged,
• flame setting may need to be adjusted. (See p. 12-13.)
If grill or surface burner flame lifts off the ports:
• shutter on the mixer tube needs to be closed until flame settles on the burner ports.
(See pp. 12-13.)
If grill or surface burner flame is yellow in color:
• shutter on the mixer tube needs to be opened until yellow disappears, (See pp. 12-
13)
If nothing on the range operates:
• check for a blown circuit fuse or a tripped main circuit breaker.
• check if range is properly connected to electric circuit in house,
If ventilation fan does not operate but everything else on the range
does:
• check behind lower access panel if power cord to blower assembly has been
disconnected.
If ventilation system is not capturing smoke efficiently:
• check on cross ventilation in room or make up air.
• excessive amount of smoke is being created; check instructions for grilling,
tdmming meats. (See pp. 18-20.)
• outside wa2!cap may be trapped shut,
• range may be improperly installed; check ducting information. (See p, 9.)
• air fitter may be improperly insta_ed (See p. 10.)
50