installation instructions

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

For Propane/Natural Gas Conversions

Pipe wrench Adjustable wrench or

5/8"(16mm) wrench

1/8" x 4

" (3mmx100mm)

at‑blade screwdriver

#2 Phillips screwdriver

Drill 3/8" (9.5 mm) drive ratchet 15/16" (24 mm)

combinationwrench

Pliers

Level Tubing cutter 1/4" (6.4 mm), 3/8" (9.5 mm),

5/16" (7.9 mm) nut drivers

Marker or pencil

3/16" (4.8 mm) carbide tip

masonry bit

1/8" (3.2 mm) drill bit Pipe‑joint compound

resistanttoPropanegas

Noncorrosive leak‑detection

solution

Tape measure

Large at‑blade screwdriver Adjustable wrench T20

Torx

®†

Driver Masking tape

1/2" (1.3 cm) open end

wrench

†

TORX and T20 are trademarks of Acument Intellectual Properties, LLC.