Manualshelf

Panel Kit Instructions

ManualsBrandsJennAir ManualsBuilt-In Bottom Freezer RefrigeratorsJennAir 36" Built-In Panel Ready Bottom-Freezer Obsidian Interior Refrigerator
21222324252627282930
INSTALLATION | 23
INSTALLATION
APPLIES TO:
1. Slightly loosen the panel bracket screws to allow
the panel to move to the left or right.
2. Adjust panels to achieve a 1/8" (3.2 mm) gap
between panels and adjacent cabinets. For
French door bottom mount and bottom mount
models, align the outside edge of the refrigerator
panel to the outside edge of the freezer panel
on both the sides. For side by side models, align
the refrigerator and freezer panels with adjacent
cabinets.
NOTE: Adjust the panel not the door, if
adjustments are needed to achieve alignment or
required spacing.
3. Tighten the panel bracket screws.
Installation Bloc
k
INSTALLATION
ADJUSTING REFRIGERATOR PANEL(S)
1/8"
1
2
3