Installation Instruction

B
C
D
A
DIMENSIONS
OPENING
DOOR SWING REQUIREMENTS
Model 115º Door
Swing "A"
90º Door
Swing "B"
Wall Gap "C" Door Open
Depth "D"
Cutout to the face of
3/4" panel with door
at 90° "E"
18" 10-1/2" (26.7 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 44-1/2" (113 cm) 1-3/4" (3.05 cm) min
24" 13" (33 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 50-1/2" (128.3 cm) 1-3/4" (3.05 cm) min
30" 15-1/2" (39.4 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 56-3/8" (143 cm) 1-3/4" (3.05 cm) min
36" 18" (45.7 cm) 5" (12.7 cm) 2-1/2" (6.4 cm) 62-7/16" (158.6 cm) 1-3/4" (3.05 cm) min
Dimensions give 2-1/2" spacing between stainless steel handle accessory and wall to avoid pinching.
For a custom wood panel, consider handle depth to maintain 2-1/2" spacing.
INTRODUCTION 11
Pinch Hazard
Installation of door panels with less than a ³⁄₈" (0.95 cm) gap
between the door panel and the adjacent cabinet increases
the risk of potential pinching.
CAUTION
E