Use and Care Guide
Table Of Contents
- Informations de sécurité
- Pièces et caractéristiques
- CARACTÉRISTIQUES DE LA TABLE DE CUISSON
- GRIL (sur certains modèles)
- UTILISATION DU FOUR
- Plaque à frire chromée (sur certains modèles)
- Boutons de commande du four
- UTILISATION DU FOUR
- MODES DE CUISSON
- CUISSON AVEC INJECTION DE VAPEUR
- Entretien et nettoyage
- GRILLES ET CHAPEAUX ÉMAILLÉS
- PLAQUE À FRIRE
- Commandes de la table de cuisson
- Extérieure de la porte
- Autonettoyage du four
- Lampes du four
- Dépannage
- ASSISTANCE OU SERVICE
- ACCESSOIRES
29
CARE AND CLEANING
To Replace:
Slide drip tray into opening on the left front side of the grill
basin.
1. Replace drip tray.
2. Place deector on top of burner
assembly.
3. Place grill grate into position.
1
1
Drip tray
1. Turn knob to 300°F (149°C) to preheat.
2. Pour water on soiled area.
Using a measuring cup, pour up to 1 cup (236.6 mL) tap
water over the soiled area. Start at the back, allowing the
water to run toward the drip tray in the front. Allow the water
to bubble on the griddle for 3–4 seconds.
Wait until preheat is complete before cleaning.
GRIDDLE
Tips:
■ Prior to cleaning the griddle, make sure that all cooktop
burners and oven controls have been turned off.
■ For best results, clean the griddle shortly after removing the
food.
Do Not Use:
■ Soap
■ Abrasive materials
■ Cleaning materials, including stainless steel cleaner
After Each Use:
3. Scrape residue into drip tray.
Use a pad holder or wooden spoon with a non-abrasive pad
or cloth. Use pressure on soiled areas. Repeat if needed for
heavy soils.