Smart Appliances Guide

CONNECTIVITY
Connected Smart Appliances - Gen III
n
2-9
Connect to WiFi
b. Within 2 minutes, press POWER, then the CONNECT
buon on the appliance. The WiFi icon on the control
panel (UI) will begin blinking. This means that the
appliance is looking for the router.
c. The lights may turn o briey, but once paired, both
will stop blinking and the WiFi icon on the appliance
will remain lit. NOTE: This can take up to 2 minutes.
¾ Select “Light is Solid, Next” to connue.
3. On the “Register Appliance” screen, press the Finish
buon to associate the appliance to the account.
NOTE: Adding the appliance to the account will also
complete the product registraon process for that
appliance.
4. Go to secon “F: APPLIANCE PREFERENCES” and set your
appliance’s nocaon preferences.
C: CONNECT VIA “APPLIANCE WIFI”
1. This method allows the user to use the appliance as a WiFi
network, then direcng the appliance to the home area
network.
¾ Select “Let’s Go” (connue to step 2).
2. On the following screen, the user is prompted to select
the appliance WiFi (SSID). Select the appliance from the
list. It will be idened with the characters of the MAC
ADDRESS but with dierent punctuaon (ex. WP_88_
e7_12_01_88_6e ). The Password is the SAID number.
NOTE: If appliance is not on list, make sure appliance is
“disconnected.” If sll not on list, power cycle appliance.
(Refer to “Disconnecng Method on page 2-8.)
¾ Select “Next” to connue.
3. A screen may momentarily indicate that it is aempng to
connect to the appliance.
4. On the “Connecon Conrm” screen, you are asked
if you can see the connect light on the appliance?
NOTE: The connect light may go out briey, but it will
come back on and then remain on.
¾ “Yes” (connue to step 5).
¾ “No” (Go to secon “D: CONNECT VIA MANUAL
METHOD.”)
5. On the “Register Appliance” screen, press the “Finish”
buon to associate the appliance to the account.
NOTE: Adding the appliance to the account will also
complete the product registraon process for that
appliance.
6. Go to secon “F: APPLIANCE PREFERENCES” and set your
appliance’s nocaon preferences.
D: CONNECT VIA “MANUAL METHOD”
1. This method allows the user to use the appliance as a
WiFI network, then direcng the appliance to the home
area network.
¾ Select “Let’s Go” (connue to step 2).
2. Open WiFi Sengs - The user is prompted to open the
WiFi sengs on their mobile device. Select the appliance
from the list. It will be a network named similarly to
( WP_88_e7_12_01_...) . (The number will match the
MAC ID on the SAID label). NOTE: If appliance is not on
list, refresh the network screen. If sll not on list, power
cycle the appliance.
3. C onnect to the network (the appliance) - When prompted
for the network password, type in the appliance’s SAID
number.
4. Open the web browser...
a. Type “192.168.10.1” in the address bar (URL window)
in the browser and press “Enter” to view the WiFi web
page.
b. Look for the home area network wireless router. If the
router is not listed, click on the drop-down box and
select from the list or enter it manually.
c. If required, enter the password/passphrase for the
home wireless network, and then press enter (–>).
5. Verify appliance is connected - Look for a solid WiFi icon
on the console (UI). NOTE: The connect light may go out
briey, but it will come back on and then remain on when
the appliance is connected.
¾ Select “Next” to connue.
6. On the “Register Appliance” screen, press the Finish
buon to associate the appliance to the account.
NOTE: Adding the appliance to the account will also
complete the product registraon process for that
appliance.
7. Go to secon “F: APPLIANCE PREFERENCES” and set your
appliance’s nocaon preferences.
E: REGISTER APPLIANCE
1. Find the SAID label on the appliance (usually under the lid
or behind the door-near the model/serial number label).
Enter or Scan the appliance SAID number. IMPORTANT:
THIS NUMBER IS CASE SENSITIVE.
¾ Select “Next” to connue.
2. On the “Register Appliance” screen, press the Finish
buon to associate the appliance to the account.
NOTE: Adding the appliance to the account will also
complete the product registraon process for that
appliance.
3. Go to secon “F: APPLIANCE PREFERENCES” and set your
appliance’s nocaon preferences.
F: APPLIANCE PREFERENCES
1. On the “Appliance Preferences” screen, type in the name
of your appliance (ex. My Washer, Clothes Dryer, etc.).
2. Set your appliance’s “Push Nocaon Preferences”.
NOTE: Each appliance type has its own unique set of
preferences and push nocaons.
¾ Select “Save” to store your Appliance Preferences.
NOTE: At any me you may select your appliance and
change your preferences and push nocaons.