Smart Appliances Guide

2-12
n
Connected Smart Appliances - Gen III
CONNECTIVITY
6. Open a Web browser. Refer to Figure 15 when performing
the following 4 steps.
A. Type “192.168.10.1” in the address bar (URL window)
and press “Enter” to view the “Smart” setup web page.
B. In the drop down list of available wireless networks,
select the name of customer’s home wireless network.
If the home wireless network is hidden, manually enter
its name and security protocol.
C. If required, enter the password/passphrase for the
home wireless network, and then Submit/Enter (–>).
Figure 15 - WiFi Web Page
7. A new web page will be displayed saying “Connecng to
Network...” While connecng, the customer’s wireless
network will be temporarily disabled. If the connecon is
unsuccessful, it will appear again in their computer’s list of
wireless networks in a couple minutes so the customer can
try again.
8. Aer successful connecon, access wireless sengs
and re-open the list of available wireless networks. The
customer should check that the computer is once again
connected to the home wireless network. If it is not,
select the home wireless network and Connect.
NOTE: It may be necessary to “refresh” the list.
9. If there are other Smart Appliances, repeat steps 1
through 6 for each.
Register Your Appliance:
Once the appliance is connected, it needs to be associated
with the user account. The consumer must perform the
following steps to nd the appliance’s unique “SAID (Security
Associaon Idener) Number” so that it can be registered
with the account.
A: SETUP APPLIANCE
1. Aer seng up the User Account, select “Add Appliance.”
2. On the “Setup Appliance” screen, select “Appliance is
already connected to WiFi.”
3. Find the SAID label on the appliance (usually under the lid
or behind the door-near the model/serial number label).
Enter or Scan the appliance SAID number. IMPORTANT:
THIS NUMBER IS CASE SENSITIVE.
¾ Select “Next” to connue.
4. On the “Register Appliance” screen, press the Finish
buon to associate the appliance to the account.
NOTE: Adding the appliance to the account will also
complete the product registraon process for that
appliance.
5. Go to secon “F: APPLIANCE PREFERENCES” on page 2-9
to set your appliance’s nocaon preferences.
Notes:
• Once the consumer connects the appliance to their home
WiFi network, it will remain linked even if the power goes
out, the appliance is moved, or if it is put in storage for a
while.
• If the consumer replaces their wireless router (or gets a
dierent Smart Appliance), they will need to repeat the
connecvity setup process.
Register Your Appliance
A
B
C