Manualshelf

Smart Appliances Guide

ManualsBrandsJennAir ManualsDual Fuel RangesJennAir NOIR 48" Stainless Steel Professional Style With Chrome-Infused Griddle Dual-Fuel Range
31323334353637383940
4-6
n
Connected Smart Appliances - Gen III
DIAGNOSTICS & TROUBLESHOOTING
Troubleshooting Guide (continued)
Troubleshoong Guide (connued)
UNABLE TO REMOTELY CONFIGURE CYCLE OR FEATURES OF THE SMART APPLIANCE
Complaint / Issue Cause / Check
Not able to remote access their Smart Appliances. 1. The consumer must have the correct e-mail and mobile number saved
on their User Account and that their nocaons are set to ON.
2. Smart Grid feature is temporarily disabled. The Smart Grid funcon
can be turned o for the current cycle by pressing the CONNECT
buon briey (WiFi icon will also be o). Press CONNECT buon again
to reacvate Smart Grid features.
3. The WiFi has been turned o. This occurs when the CONNECT
buon is pressed and held for more than 7 seconds, but less than 15
seconds. To turn the WiFi back on, press the CONNECT buon once
and the appliance will reconnect to the router.
4. The Appliance has been disconnected. This occurs when the
CONNECT buon is pressed and held for more than 15-20 seconds.
The appliance must be re-connected to the wireless router or access
point.
5. The appliance is not receiving a signal from the wireless router. Press
the CONNECT buon; if an error tone sounds, the router may not be
on or connected to the Internet.
Out-dated version of Whirlpool™ app Is the appliance running the latest version of the Whirlpool™ app?
NO EMAIL / TEXT NOTIFICATION
Complaint / Issue Cause / Check
Unable to use Smart features or receive email or
text nocaons.
1. The consumer must have the correct e-mail and mobile number saved
on their User Account and that their nocaons are set to ON.
2. Smart Grid feature is temporarily disabled. The Smart Grid funcon
can be turned o for the current cycle by pressing the CONNECT
buon briey (WiFi icon will also be o). Press CONNECT buon again
to reacvate Smart Grid features.
3. The WiFi has been turned o. This occurs when the CONNECT
buon is pressed and held for more than 7 seconds, but less than 15
seconds. To turn the WiFi back on, press the CONNECT buon once
and the appliance will reconnect to the router.
4. The Appliance has been disconnected. This occurs when the
CONNECT buon is pressed and held for more than 15-20 seconds.
The appliance must be re-connected to the wireless router or access
point.
5. The appliance is not receiving a signal from the wireless router. Press
the CONNECT buon; if an error tone sounds, the router may not be
on or connected to the Internet.
Out-dated version of Whirlpool™ app Is the appliance running the latest version of the Whirlpool™ app?