Smart Appliances Guide

DIAGNOSTICS & TROUBLESHOOTING
Connected Smart Appliances - Gen III
n
4-9
Buttons & Indicators
Control Panel Indicator Lights for Connected Appliance
Refer to Figure 2 on previous page for location of lights/icons
LED Icon LED Status: Indicates That:
WiFi Connect O • Connecon not made to home router or access point (AP).
This will occur when appliance is not connected and not
commanded to be connected, as well as when WiFi has
been turned o.
or
• Appliance is in standby mode.
WiFi Connect On • Connecon made to home router or access point (AP).
WiFi Connect Blinking
(1 Hz)
• Connecng to home router or access point (AP).
Blue Smart Grid
&
Amber Smart Grid
O • Smart Grid feature is o
or
• WiFi is turned o or not connected (“WiFi icon” will also
be o)
or
• Connecng to home router if “WiFi icon” is blinking.
or
• Appliance is in standby mode.
Blue Smart Grid On • Smart Grid feature is on and power grid is normal (OFF-
PEAK energy demand).
or
• Smart Grid feature is on and power grid event is at
PEAK energy demand (mode 1 or mode 2) and has been
overridden.
Amber Smart Grid On • Smart Grid feature is on and power grid event is acve
PEAK energy demand (mode 1 or mode 2). Appliance
operaon will be altered or delayed from starng to save
energy for the power grid event duraon.
Blue Smart Grid Blinking
(1 Hz)
• Connecon to home router or access point (AP) has been
made, but connecon to backend Whirlpool Integrated
Service Environment (WISE) has not been made or has
been disrupted.
Smart Delay O • Delay Start not on.
Smart Delay On • Smart Delay has been turned on by a mobile APP.
Countdown to start of cycle is also displayed. The Remote
Start icon will also be on.
or
• Smart Grid (mode 1 or mode 2) event has occurred.
Countdown to the end of the Smart Grid event is also
displayed. The amber Smart Grid icon will also be on.
Smart Delay Momentary
Blinking
• Pressing START buon and trying to start a cycle when
Smart Grid (mode 1 or mode 2) event is occurring will
cause Smart Delay icon to blink momentarily, then remain
on.
Remote Start O • Remote control funconality is o.
Remote Start On • Remote control funconality is on.
All O • When SW rmware is being updated remotely, the
appliance will not be operaonal. This includes no LEDs lit
or response from buon commands.