Smart Appliances Guide

7-2
n
Connected Smart Appliances - Gen III
CLEAN-CONNECT DISHWASHER
Model Number
Clean-connect Dishwasher Model
Number
WDT995SAFM*
* Represents color & engineering revision
The Clean-connect Dishwasher Model and Serial Numbers are
located on the inside edge of the tub as shown in Figure 1.
The SAID and MAC address are located on the WiFi enclosure
located on the back of the dishwasher as shown in Figure 3
(next page).
The only dierence between the original model and the Smart
Appliance model are the HMI (Human Machine Interface) and
WiFi Board.
If the Clean-connect Dishwasher is hooked up without Internet
service, it will funcon similar to a non-Smart Appliance
dishwasher.
Figure 1 - Location of Model and Serial Number Labels
Locaon of Model and Serial Number
for Clean-connect Diswasher
Model and Serial Numbers
Clean-connect Dishwasher User Interface (aka HMI)
The CONNECT buon (A) is used during the inial connecon of the Clean-connect Dishwasher to the home area network (HAN).
The Connecvity Status Indicators (B) provide status of Remote Start, WiFi, and Smart Delay. The WiFi indicator will be lit when
dishwasher is connected to home area network. The Electronic Rates Indicators (C) indicate the grid energy demand. The blue
indicator will be lit during mes of NORMAL ELECTRICITY RATES and the amber indicator will be lit during mes of PEAK
ELECTRICITY RATES.
Clean-connect Dishwasher Components
NOTE: For complete details, see “Connecvity Buons and Indicators” in “Secon 4: Diagnoscs and Troubleshoong.”
Figure 2 - Clean-connect Dishwasher User Interface
A. Connect Buon
• Connect appliance to HAN
• Override Smart Delay
C. Electricity Rates Indicators
• Peak Electricity Rates
• Normal Electricity Rates
B. Connecvity Indicators
•
WiFi
•
Remote Start
24-Aug-2016 11:54:40 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
A
B
C