Smart Appliances Guide

8-2
n
Connected Smart Appliances - Gen III
SMART REFRIGERATOR
SAID, Model and Serial Numbers
Model Number:
Smart Refrigerator Model
Number
WRF995FIF*
The Smart Appliance ID (SAID) from your refrigerator which
can be found on a scker on top of the control housing located
on top of the refrigerator.
The only dierence between the original model and the
Smart Appliance model are the Smart Appliance components;
HMI (Human Machine Interface and WiFi Board. If the Smart
Refrigerator is hooked up without Internet service, it will
funcon similar to a non-Smart Appliance Refrigerator.
Smart Refrigerator Component Locations
Figure 1 - Location of SAID, Model, and Serial Number Labels
Smart Refrigerator Component Locations
WIFI Board and Antennae
Location of SAID
Number Plate on
the top
Location ,
Model, and
Serial Number
Labels for Smart
Refrigerator on
the inside.
WIFI Board and Antennae removal
1. Remove the right refrigerator door Hinge Cover.
2. Depress the blue tab and disconnect the antennae coupler.
3. Remove the wiring connector from the other end of the
board.
4. Depress the two black plasc tabs holding the board at the
boom, and remove.
Antennae wire connecng
the WIFI board to the
Antennae
WIFI BOARD
The WIFI Board is located under the right refrigerator
doorhinge cover (FIGURE 3). It receives 12.7 VDC power from
theOrion Board.
WIFI Antennae (Figure 2)
Figure 2
Figure 3
(Figure 3)