Installation Instructions

3
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
When installing cooktop, use minimum dimensions given.
n Use the countertop opening dimensions that are given
with these Installation Instructions. Given dimensions are
minimum clearances and provide 0" (0 cm) clearance.
n Grounded electrical supply is required. See the “Electrical
Requirements” section.
n If cabinet has drawers, drawers will need to be removed and
drawer fronts installed on front of cabinet.
n To eliminate the risk of burns or re by reaching over the
heated surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage is
provided, the risk can be reduced by installing a range hood
or microwave hood combination that projects horizontally a
minimum of 5" (12.7 cm) beyond the bottom cabinets.
IMPORTANT: An undercounter built-in oven cannot be installed
under this product.
Product Dimensions
30" (76.2 cm) Cooktop – for standard and electric models
36" (91.4 cm) Cooktop – for standard and electric models
A. 22
1
/
16
" (56.0 cm) without stainless steel trim or
22
1
/
2
" (57.2 cm) or 23" (58.5 cm) with stainless
steel trim (depending on model)
B. Model/serial/rating/clearance plate location
C. 20
53
/
64
" (52.9 cm) screw head to screw head
A. 30
7
/
8
" (78.4 cm)
B. 12
7
/
16
" (31.6 cm)
C. 28
35
/
64
" (72.5 cm)
D. 14
29
/
64
" (36.7 cm)
E. 1
41
/
64
" (4.2 cm)
NOTE: 2" (5.1 cm) recommended
minimum cabinet to motor clearance
F. 17
29
/
32
" (45.5 cm)
G. 3
3
/
4
" (9.5 cm)
A. 20
53
/
64
" (52.9 cm) screw head to screw head
B. Model/serial/rating/clearance plate location
C. 22
1
/
16
" (56.0 cm) without stainless steel trim or
22
1
/
2
" (57.2 cm) or 23" (58.5 cm) with stainless
steel trim (depending on model)
A. 36
5
/
16
" (92.3 cm)
B. 11
13
/
16
" (30.0 cm)
C. 34
1
/
4
" (87.0 cm)
D. 14
29
/
64
" (36.7 cm)
E. 8" (20.3 cm)
NOTE: 2" (5.1 cm) recommended
minimum cabinet to motor clearance
F. 17
29
/
32
" (45.5 cm)
G. 3
3
/
4
" (9.5 cm)