Dimension Guide

JENN-AIR
®
DETAILED PLANNING DIMENSIONS
3 of 3
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air
®
appliances are appropriately UL, CUL or CSA approved. 8719AdZw816
OPENING/CLEARANCE DIMENSIONS
BACK VIEW
C
C
L L
K K
M
N
O
135º 135º
A A
B
C
D
E
F
G
J
H
I
E
F
G
H
I
A*
B*
C*
D*
H
I
P
JFFCC72EF
72" COUNTER-DEPTH FRENCH DOOR REFRIGERATORS WITH EXTERNAL DISPENSER
JFFCC72EF – 35
3
/4" x 71
15
⁄16" x 31
1
/4" (with handles)
e
D
A
B
B
C
F
G
E
w
MODEL # JFFCC72EF
in cm
A
Width (min.) 36
3
⁄4 93.3
B
Minimum width from side of refrigerator
to fixed wall – door open 90° (full access
to remove bins)
3
3
⁄4 9.5
Minimum width from side of refrigerator
to fixed wall – door open approx. 135°
12 30.5
C
Width of recommended electrical/
water installation area
35
1
⁄2 90.2
D
Height (min.) 72
7
⁄16 184.0
E
Height of recommended electrical
installation area (min.-max.)
24-36
61.0-
91.4
F
Height of recommended water
installation area
12 30.5
G
Depth of recommended water
installation area
1 2.5
H
Water line location – distance from side 2
1
⁄2 6.4
I
Water line location – distance
from bottom
7 17.8
e
Recommended electrical connection location
w
Recommended water connection location
ELECTRICAL REQUIREMENTS
115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is required.
A dedicated circuit is recommended. Use an outlet that cannot be turned
off by a switch.
Minimum length of power cord is 60" (152.0 cm). Do not use an
extension cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between 30 and 120 psi (207 and
827 kPa) is required to operate the water dispenser and ice maker. Call a
licensed, qualified plumber with any questions about the water pressure.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water coming out of a reverse osmosis
system going to the water inlet valve of the refrigerator needs to be
between 30 and 120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system is connected to the cold water
supply, the water pressure to the reverse osmosis system needs to be a
minimum of 40 to 60 psi (276 to 414 kPa).
FRONT VIEW