Installation Instructions

22
6. Pull electrode out of bracket.
7. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orice spud, then remove by turning the
gas orice spud counterclockwise and lifting out. Set gas
orice spud aside.
8. Gas orice studs are stamped with a letter and a number.
Install the Number 125 oven bake burner orice spud.
9. Place Natural gas orice in plastic parts bag for future use,
and keep with package containing literature.
10. Push down on the clip on the electrode bracket.
11. Replace oven bake burner electrode inside bracket.
12. Reinstall the oven bake burner and oven bake burner
screws. See Step 4 for illustration.
13. Replace oven bafe and oven bafe nuts. The front holes will
be aligned, and a click will sound when bafe is seated.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Gas orice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket