Installation Instructions

33
2. Pull the broil burner toward you until it slides out of the hole
in the oven back, and pull the electrode out of the bracket.
The broil burner will hang down in the back of the oven while
you change the orice.
3. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orice spud, then remove by turning the
gas orice spud counterclockwise and lifting out. Set gas
orice spud aside.
4. Gas orice studs are stamped with a letter and a number.
Install the Number 148 oven broil burner orice spud.
5. Place Propane gas orice in plastic parts bag for future use,
and keep with package containing literature.
6. Replace the broil burner in the hole in the oven back with the
broil burner assembly inside the broil burner electrode hole
as illustrated.
7. Reinstall the oven broil burner screw. See Step 1 for
illustration. The screw is aligned with the hole when
aclicksounds.
Convert Oven Bake Burner (left oven cavity on
48" [121.9 cm] models)
1. Remove oven racks. See the “Remove Racks” section.
2. Remove the oven door. See the “Remove Oven Door”
section.
3. Slide the bake burner cover to the right or left.
4. Lift up and remove oven bake burner cover, and set aside.
5. Remove the oven bake burner screws and oven bake burner,
and gently set aside.
A
B
A. Grasp electrode here.
B. Bracket
Broil burner hanging
in back of oven
A
B
C
A. Oven back
B. Broil burner orice
C. Broil burner orice hole
A
B C
A. Broil burner orice hole
B. Broil burner electrode
C. Broil burner electrode hole
A
A. Bake burner cover
A
C
D
A
B
A. Oven bake burner
B. Oven bake burner screws
C. Oven bake burner electrode bracket
D. Oven bake burner electrode