Use and Care Guide

13
4. Remove the hot water/steam spout.
5. Attach the milk container to the nozzle by pushing the bottom
of the container. A tone will sound if the sound notication is
enabled.
6. Place a large cup under the coffee spouts and frothed milk
spout. To move the spout nearer to the cup, simply pull it
downward.
Adjusting the Amount of Froth
Turn the froth adjustment dial on the milk container to adjust the
amount of froth on the milk delivered while making the drinks. See
table below.
DIAL
POSITION
DESCRIPTION RECOMMENDED FOR...
No froth CAFFE LATTE / MILK (hot milk)
Min. froth LATTE MACCHIATO
Max. froth CAPPUCCINO / MILK (frothed
milk)
Making Milk-Based Drinks Automatically
1. Fill the milk container and attach it as described above.
2. Select the required beverage from the home page:
Cappuccino, Latte Macchiato, Caffe Latte, Hot Milk,
Cappuccino+, Espresso Macchiato, Flat White or Cappuccino
Mix.
3. On the display the coffee maker recommends turning the
foam adjustment dial based on the foam requirements for the
original recipe. Turn the dial on top of the milk container lid
and conrm the selection by pressing
OK
.
4. After a few seconds, preparation begins automatically
and an image of the selected beverage appears on the
display, together with a progress bar which gradually lls as
preparation progresses.
5. Once the coffee has been made, the coffee maker is ready to
make the next beverage.
NOTES:
If "Energy Saving" mode is enabled, there may be a few
seconds delay before the beverage is delivered.
Press
ESC
to interrupt preparation completely and go back
to the home page.
Press
STOP
to interrupt milk or coffee delivery and move on
to the next delivery (if applicable) to complete the beverage.
At the end of delivery, to increase the quantity of coffee in the
cup, press
EXTRA
.
Preparation of each milk based drink can be customized.
See "Customizing Beverages" and Memorizing Your Personal
Prole" sections.
Do not leave the milk container out of the refrigerator for more
than 15 minutes. The quality of the foam will decrease the
longer the container is out.
A
B
A. Hot water and steam nozzle
B. Hot water spout
A
B
A. Hot water and steam nozzle
B. Milk container
A
B
C
A. Coffee spouts
B. Milk spout
C. Cup