Use and Care Guide

21
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
TURN THE MILK FROTH
ADJUSTMENT KNOB TO
START CLEANING
Milk has been delivered recently and the tube
inside the milk container must be cleaned.
Turn the froth adjustment dial to CLEAN.
TURN THE MILK FROTH
ADJUSTMENT KNOB TO
MILK POSITION
The milk container has been inserted with the
froth adjustment dial in the CLEAN position.
Turn the dial to the required froth position.
Reminder that the appliance needs descaling
and/or the lter must be replaced.
NOTE: Water lter not available on this model.
The descaling procedure described in the "Descaling"
section needs to be performed as soon as possible.
Reminder that the tubes inside the milk
container must be cleaned.
Turn the froth adjustment dial to CLEAN.
Reminder that the machine must be descaled. The descaling procedure as described in the
"Descaling" section needs to be carried out as soon
as possible.
Indicated that the auto-start function is enabled. To disable the function, proceed as described in the
"Auto-Start" section.
Energy saving is enabled. To disable energy saving proceed as described in the
"Energy Saving" section.
C
L
E
A
N
ESC
C
L
E
A
N