Manualshelf

Installation Instructions

ManualsBrandsJennAir ManualsCooking Appliances24 Inch Smart Built-In Convection Oven With WiFi, True European Convection, CustomClean™, LCD Display, Culinary Intelligence, Cinematic Lighting, Temperature Probe, Sabbath Mode, Self Clean, Delay Clean, and ADA Compliant
12345678910
8
Install Oven
1. Remove the oven racks.
2. Using two or more people, lift the oven by the side handles
located on the right and left side of the oven. Gently insert
into the cabinet cutout.
3. Push against seal area of front frame to push oven into
cabinet.
4. Install the bottom oven trim using the two 3.5 x 9.5 mm
self-tapping screws provided.
5. Securely fasten oven to cabinet using the 4 x 25 mm
selftapping screws provided (1 on each side). Insert the
screws through holes in mounting rails. Do not overtighten
screws.
6. Install the oven racks.
7. Replace oven door by inserting both hanger arms into the
door.
8. Open the oven door. You should hear a “click” as the door is
set into place.
9. Move the hinge levers back to the locked position.
10. Check that the door is free to open and close. If it is not,
repeat the oven door removal process and installation
procedures. See “Remove Oven Door” section.
11. Reconnect power.
12. On some models, the display panel will light briefly, and “PF”
should appear in the display.
13. If display panel does not light, please reference the
“Assistance or Service” section of the Use and Care Guide
or contact the dealer from whom you purchased your oven.
A
A
A. 4 x 25 mm self-tapping screws
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.