Installation Instructions

9
Complete Installation
1. Check that all parts are now installed. If there is an extra
part, go back through the steps to see which step was
skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.
Check Operation
NOTE: Refer to the “Control Panel” and “Oven Functions”
sections of the Use and Care Guide for steps 1 through 5.
1. Press the On/Off keypad to turn the power On.
2. When the oven is turned on for the first time, you will have to
select the desired language and set the correct time.
3. Select “Traditional” and then “Conventional.”
4. Set the temperature.
5. Press START.
If oven(s) does not operate, check the following:
■ Household fuse is intact and tight; or circuit breaker has
not tripped.
■ Electrical supply is connected.
■ See “Troubleshooting” section in the Use and Care
Guide.
6. When oven has been on for 5 minutes, feel for heat.
If you do not feel heat, turn off the oven and contact a
qualied technician.
7. To set oven functions, refer to the Use and Care Guide.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the
Use and Care Guide, or contact the dealer from whom you
purchased your built-in oven.