Instructions/Assembly Guide

2
BUILT-IN SINGLE OVEN, MICROWAVE OR
COFFEE MACHINE SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
■ Phillips screwdriver
■ Measuring tape
■ Level
■ Hex head or at-blade
screwdriver
Parts supplied
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
■ Follow the instructions below along with the instructions in
the built-in oven, microwave or coffee machine Installation
Instructions.
Product Dimensions
Side Trim Cover Kits
Single Built-In Oven L1 = 23
29
/
64
" (59.6 cm)
Microwave Built-In Oven L2 = 17
27
⁄
32
" (45.3 cm)
For 27" (68.6 cm) cabinet W1 = 1
11
⁄
16
" (4.3 cm)
For 30" (76.2 cm) cabinet W2 = 3
1
⁄
4
" (8.2 cm)
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
A. Mounting jig
B. Trim surface (2 per 27" (68.6 cm) and
2 per 30" (76.2 cm) cabinets)
C. Trim structure (2 per 27" (68.6 cm) and
2 per 30" (76.2 cm) cabinets)
D. 2 Self Drilling
Screws
E. 8 Wood Screws
F. 2 Hex Head
screws
L2
L2
L1
L1
W1
W1
W2
W2
CBA
D
E
F