Cycle Guide

6
3. Touch ON, and then touch SETUP.
NOTE: The programmed status of the oven(s) will be
displayed.
4. Touch CHANGE.
5. For single ovens, go to Step 6. For double ovens, select the
desired oven, and then touch NEXT.
6. Select the desired oven temperature and touch NEXT.
7. (Optional) Set Bake Time (00:00) and touch SET.
or
Touch SKIP TIMER.
8. Touch DELAY and set both the “Cooking Starts at” time.
NOTE: If a bake time is set in the previous steps, the “Cooking
ends at” will be calculated based on the bake time. If the timer
is not set, the Sabbath Mode will continue until canceled.
9. Touch SET.
10. Review the settings and touch START to begin the baking
cycle.
NOTE: Once the timer ends; opening and closing the oven
door will deactivate the Sabbath mode.
Change Temperature
The oven temperatures can be changed while running Sabbath
Mode by touching the -25° F (-5°C) or +25°F (+5° C). Touching
these buttons will not result in any changes to the screen and no
sound will play.
As an example, touching the +25°F (+5° C) button 3 times will
result in an oven cavity temperature increase of +75° F (+15° C);
however, the initial oven cavity set temperature will remain on the
screen.
NOTE: On double oven models, the oven cavity temperature may
be set individually.
Main Menu
From the Main Menu, all automatic cooking programs can be
activated; all manual cooking can be programmed; settings can be
adjusted; and instructions, preparation, and tips can be accessed.
This manual covers different models. The oven you have
purchased may have some or all of the items listed. The locations
and appearances of the features shown here may not match
those of your model.
Tools Menu
Your microwave provides you with the ability to control several of
the default settings and access information through the on-screen
display. These include: Clock, Sound, Appearance, Language,
Temperature Units, Service, and Restore Defaults.
This manual covers different models. The oven you have
purchased may have some or all of the items listed. The locations
and appearances of the features shown here may not match
those of your model.
To Access Tools Menu:
1. Touch TOOLS.
2. From the Tools Menu, scroll to the desired Tools choice.
3. Touch the quickset pad that corresponds to the desired
choice.
MODE AVAILABLE SELECTIONS
Sabbath
■ Sets Sabbath Mode
Demo Mode
■ On
■ Off (Default)
Temp Units
■ Celsius
■ Fahrenheit (Default)
MODE AVAILABLE SELECTIONS
Language
■ Français
■ English (Default)
Display On/Off
■ Display Off
■ Display Dimmed (Default)
Clock On/Off
■ Clock Off
■ Clock On (Default)
Brightness
■ Max
■ High
■ Med (Default)
■ Low
■ Dim
Sound
■ Key Press
■ Timer & Alert (Default)
■ Power On & Off
Clock Theme
■ Textures
■ Celebration
■ Culinary
■ Clock Only
■ Animation (Default)
■ Spring
■ Summer
■ Fall
■ Winter
Time & Date
■ Daylight Saving
■ Clock Style
■ Set Clock (Default)
■ Set Date
Button Lock
■ Press Lock to lock controls
Number Entry
■ Number Pad
■ Scroll (Default)
Touch Calib.
■ Use to calibrate touch screen
Service Info.
■ Model Number and Serial Number
Legal Info.
■ License Information
Restore Defaults
■ Restores Factory Defaults
Service Information
1. From the Tools Menu, scroll until Service Info appears.
2. Touch TIPS.
3. The service phone number, website, model number, and serial
number are displayed on the screen.
4. Refer to the Quick Start Guide for contact information.
Restore Factory Settings
1. From the Tools Menu, scroll until Restore Factory Defaults
appears.
2. Touch TIPS, read the drop-down message, and then swipe
the message arrow up.
3. Touch RESET to Restore Factory Defaults.
4. The following settings will be lost: Language, Temperature
Units, Clock Settings, Date and Screen Appearance. The
Welcome Guide will appear to help you reset these settings.
See the “Welcome Guide” section for additional information.