Wood Panel/ Armoire Installation Instructions

14 | INSTALLATION
APPLIES TO:
IMPORTANT: For an Armoire installation, instead
of drilling holes along the top edge(s) of the custom
door panel(s), you must adjust the placement of the
drilling template (provided with the refrigerator).
NOTES:
■ No template adjustment is needed for the bottom
edge of the door panel(s).
■ No template adjustment is needed for the custom
freezer drawer panel.
1. Align the drilling template on the back of the
custom refrigerator door panel so that the top of
the template is offset 6³⁄
4
" (17.2 cm) from the top
of the refrigerator door panel.
NOTE: The only offset dimension is the 6³⁄
4
"
(17.2 cm) offset from the top of the door panel.
2. Continue to use the template as you normally
would along the bottom, handle side of the door
panel.
INSTALLATION
MARKING DOOR PANEL TOP BRACKET LOCATION(S)
A
C
B
A. Top of custom refrigerator door panel
B. Drilling template
C. Bottom of custom refrigerator door panel
6
3
⁄
4
" (17.2 cm)