Wood Panel/ Armoire Installation Instructions

INSTALLATION | 15
INSTALLATION
APPLIES TO:
1. Fasten the refrigerator/freezer door panel top
bracket to custom wood door panel using
hex-head pointed screws (2) at marked screw
locations (refer "Marking Door Panel Top Bracket
Location(s)" section).
2. For marking location of the shoulder washers,
Measure ‘A’ from the top of the panel, measure
‘B’ from side of panel. Mark the hole locations as
shown in Figure. Refer Table 1 for ‘A’, ‘B’, and
‘C’ dimension based on the models.
3. Fasten the shoulder washer to custom wood
door panel using hex-head pointed screws (2) at
marked screw locations in Step 2.
NOTE: Do not drive the screws completely,
allowing clearance so that shoulder washer can
be inserted into J slot located on door.
4. In case of French door bottom mount and side
by side models, repeat Steps 1-3 for installing
panel brackets and shoulder washers on other
door.
Table 1 - Shoulder washer locations
Model ‘A’ ‘B’ ‘C’
36"
Bottom
Mount
18
5
/
16
"
(465.5 mm)
1
3
/
16
"
(30.3 mm)
30
1
/
2
"
(774 mm)
36" / 42"
French
Door
18
5
/
16
"
(465.5 mm)
7/8"
(21.75 mm)
30
1
/
2
"
(774 mm)
42" / 48"
Side by
Side
23"
(583.5 mm)
13/16"
(20.6 mm)
42
5
/
16
"
(1075 mm)
INSTALLATION
INSTALLING PANEL TOP BRACKET(S) AND
SHOULDER WASHERS
A
B
C
B
Hinge side