Wood Panel/ Armoire Installation Instructions

16 | INSTALLATION
INSTALLATION
INSTALLING FREEZER BRACKETS
APPLIES TO:
1. For marking location of the freezer bracket
screws, Measure ‘A’ from the top of the panel.
Mark the hole locations as shown in Figure.
Refer to Table 2 for ‘A’ dimension based on the
models.
2. Fasten the freezer bracket to custom wood
drawer panel at marked screw locations in
step 1.
3. Repeat step 1-2 to attach freezer bracket on
other side.
Table 2 - Freezer bracket locations
Model ‘A’
36" Bottom Mount /
French Door
1/2"
(12.85 mm)
42" French Door
9/16"
(14.43 mm)
FOR SIDE BY SIDE MODELS - SKIP THIS STEP!
A
2" (52.77 mm)
5
5
/
8
" (143.3 mm)
4
7
/
8
" (123.4 mm)
5
5
/
8
" (143.3 mm)