Installation Guide

8
PRODUCT DIMENSIONS
SIDE VIEW
 The depth from the front of the top grille to the back
of the refrigerator cabinet is 25⁄8" (64.5 cm).
 The power cord is 84" (213 cm) long.
 The water line attached to the back of the refrigerator
is 5 ft (1.5 m) long.
 Height dimensions are shown with leveling legs
extended 1/8" (3 mm) below the rollers.
*When leveling legs are fully extended to 1⁄4"
(3.2 cm) below rollers, add 1⁄8" (2.9 cm) to the height
dimensions.
TOP VIEW
Model A B
42 Euro-Style 41" (104.1 cm) 2⁄8" (5.3 cm)
48 Euro-Style 47" (119.4 cm) 2⁄8" (5.3 cm)
42 Pro-Style
®
41" (104.1 cm) 2
6
⁄8" (6.67 cm)
48 Pro-Style
®
47" (119.4 cm) 2
6
⁄8" (6.67 cm)
FRONT VIEW
 Width dimensions were measured from trim edge to
trim edge.
 Height dimensions are shown with leveling legs
extended 1/8" (3 mm) below the rollers.
Model Tipping Radius A
42 42⁄" (107.5 cm)
48 48⁄" (122.8 cm)
*When leveling legs are fully extended to 1⁄4" (3.2 cm)
below rollers, add 1⁄8" (2.9 cm) to the height dimensions.
DOOR SWING DIMENSIONS
The location must permit both doors to open to a
minimum of 90°. Allow 4⁄2" (11.4 cm) minimum space
between the side of the refrigerator and a corner wall.
NOTE: More clearance may be required if you are using
overlay panels, custom handles, or extended handles.
To adjust the door swing, see “Adjust Doors.”
A
B
A
*83³⁄8"
(211.8 cm)
*83³⁄8"
(211.8 cm)
25³⁄8"
(64.5 cm)
84" (213.4 cm)
Power Cord
25³⁄8"
(64.5 cm)
23¹⁄2"
(59.7 cm)
*3¹⁄2" (8.9 cm)
(see chart following)