Dimension Guide

bvegt
DETAILED PLANNING DIMENSIONS GUIDE
JUBFR242HL, JUBFL242HL, JUBFR242HM, JUBFL242HM, JUBFL242HX, JUBFR242HX
23⁄" (W) x 34⁄" (H) x 23⁄" (Depth without door panels/handles)
W11356581A
08/19
®
/™ ©2019 JennAir. All rights reserved.
WOOD PANEL GUIDE
IMPORTANT:
 The graphics in following sections show a custom
panel for a door with the hinges installed on the
right-hand side. If your beverage center has the
hinges installed on the left-hand side, rotate the
custom frame 180° so the hinge markings will be on
the left.
 Panel dimensions shown are the minimum size to
cover the appliance door. Panels can be made taller/
wider to match surrounding cabinetry.
 The recommended thickness of the overlay panel is
3/4" (19 mm).
 Custom solid door overlay panel must not weigh more
than 20 lbs (9.07 kg).
 Custom glass door overlay panel must not weigh more
than 10 lbs (4.54 kg).
 Overlay panels weighing more than recommended
may cause damage to your appliance.
SOLID DOOR OVERLAY PANEL
GLASS DOOR OVERLAY PANEL
Pinch Hazard
Installation of door panels with less than a ³⁄₈" (0.95 cm) gap
between the door panel and the adjacent cabinet increases
the risk of potential pinching.
CAUTION
(125 mm)
2"
(53 mm)
1/4"
(7 mm)
1/8"
(3 mm)
(60.3 cm)
1/2"
(12 mm)
(77.7
5 cm)
(125 mm)
2"
(53 mm)
1/4"
(7 mm)
1/8"
(3 mm)
(43.3 cm)
(55.4 cm)
(60.3 cm)
1/2"
(12 mm)
(77.75 cm
)
Solid door overlay panel and hinge routing dimensions
Glass door overlay panel and hinge routing dimensions