Installation Instructions

DOOR REVERSAL
DOOR REVERSAL
DOOR REVERSAL | 21
5
Reinstall the plastic screw cover to
original locations on the hinges.
7
Reinstall the top and bottom end caps
on the door (the top right end cap is
now the bottom left end cap and vice
versa).
NOTE: For custom wood install skip
this step.
6
Slide the door onto the hinges. Using
Torx T25 screwdriver install the screws
(removed in the step 6 of “Removing
the Hinges” section) onto the door.
8
Reinstall the top metal bracket on the
door.
NOTE: For stainless steel panel install
skip this step.
9
Return the ice maker back to upright
position.
Plastic screw cover
WARNING
Excessive Weight Hazard
Use two or more people to move and install
ice maker.
Failure to do so can result in back or other
injury.