Installation Instructions

INSTALLATION
34 | INSTALLATION
CUSTOM WOOD DOOR PANEL
If stainless steel panel is installed, skip “Custom Wood Door Panel” section.!
4
Lightly press the custom panel onto
the door using double sided adhesive
tape. Adjust height of the panel to
align with the adjacent cabinetry. Press
the panel firmly against door.
2
Remove the top and bottom end caps
using the Phillips screwdriver and
place them aside.
1
Remove screws and the top metal
bracket using the Phillips screwdriver.
Remove and place them aside. Skip
this step and go to the step 4 if the
door reversal has been completed.
3
Reinstall top metal bracket using
screws removed in the step 1.