Installation Instructions

GETTING STARTED | 5
GETTING STARTED
GETTING STARTED
BEFORE INSTALLATION
Gather the required tools and parts before
starting installation. Read and follow the
instructions provided with any tools listed.
IMPORTANT: These instructions are intended
as a general guide only and do not supersede
any national or local codes in any way.
Compliance with all local, state, or national
codes pertaining to this type of installation
should be determined prior to installation.
Installer: Please be sure to leave Installation
Instructions with the homeowner.
Homeowner: Keep the Installation Instructions
for future reference.
TOOLS REQUIRED
Gather the required tools before starting
installation.
TOOLS REQUIRED
 Drill and drill bits
 Phillips screwdriver
 Pencil
 Masking tape
 Two adjustable wrenches
 Level
 Wood screws
 2" Hole saw or 2" Forstner bit
 3/16" hex driver
 1/4" nut driver
 Pliers
 Right angle drivers
 TORX T20, T25
†
screwdriver
 Tape measure
PARTS PROVIDED
 Cabinet brackets
 Drain hose and clamp (in hose bag) - on
some models only
 #8 x 1/2" pan head wood screws (14)
 Double sided adhesive tape
(for custom door panel)
 Auxiliary grill kit
†
Torx, T20 and T25 are trademarks of Acument Intellectual Properties, LLC.