Installation Guide

12
Prepare Blower Motor Assembly
Vented
1. Assemble the 2-piece telescoping round duct to the blower
motor assembly top duct extension. Secure with screw and
metal duct tape.
A. Intake transition
B. Telescoping round duct
C. Blower motor
Install Cooktop, Downdraft and Blower Motor Assembly
A
B
C
Alternate Blower Configuration
1. After establishing the location of the products to be installed.
The blower can be congured to support the desired ducting
location.
2. Prepare the blower assembly for installation and assemble
the two hold down brackets supplied to he blower.
3. Locate the downdraft in the countertop.
4. Assemble the supplied transition for connection to the
blower assembly using 4-screws supplied.
5. Assemble the telescoping duct, supplied to the blower
assembly. Secure all joints and seal using aluminum tape.
6. Use wood screws to secure the blower to the cabinet oor
using the 2-brackets supplied. Secure one at the front and
one at the rear.
Left Discharge
Rear Discharge
Internal (Non Ducted) Venting and Right Discharge