Installation Guide

5
Planning Your Cabinet Cutout
Installation Options for Modular Downdraft
Planning your counter cutout, refer to installation instruction for modular cooktops and full size cooktops and add:
■ 3
55
\
64
” (9.8 cm) for each downdraft mounted between cooktops
■ 3
51
\
64
” (9.6 cm) for each downdraft mounted on outside of cooktops
The downdraft can be mounted between cooktops or on the sides of them.
If mounted on the side, this requires relief cuts (back cutting) on the countertop.
NOTE: When downdraft is mounted on outside of cooktop on right hand side, against the countertop, the countertop must be cut as
shown in Figure A or Figure B. The shaded areas of the gures represent the countertop.
15" (38.1 cm)
(DD on outside of cooktop)(DD between cooktops)
DD 15" (38.1 cm) 15" (38.1 cm) DD
15" (38.1 cm) DD15" (38.1 cm) 15" (38.1 cm) DD DD DD
DD DD
30" (76.2 cm) OR 36" (91.4 cm)DD DD
DDDD DD DD
Downdraft
(
DD)
15" (38.1 cm) cooktop
(15" [38.1 cm])
15" (38.1 cm) 15" (38.1 cm)
15" (38.1 cm)
15" (38.1 cm)
15" (38.1 cm)
15" (38.1 cm)
15" (38.1 cm)
15" (38.1 cm)
15" (38.1 cm)
30" (76.2 cm) OR 36" (91.4 cm)30" (76.2 cm) OR 36" (91.4 cm)
1
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2 1
15 minOFF
21
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2 1
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2
1
15 minOFF
2
114.7
[2.2 cm]
[3.2 cm]
0
1
1
4
”
1
13
64
”
7
8
”
[3.1 cm]
[3.18 cm]
1
1
4
”
[2.2 cm]
7
8
”
Figure A Figure B