Product Manual

5
SAFETY AND HEALTH INSTRUCTIONS
FOR SAFE USE
In the event that an injury does occur, please seek medical attention at once since the
equipment may cause injuries that are not initially recognized.
1. Use proper electrical power.
Connect unit to a dedicated circuit of the proper voltage, proper rated circuit breaker, and
wired with the proper wire size and number of conductors.
Ensure that all connections are properly tightened. Improper connections could result,
causing damage, injury, or death of the equipment operator.
This machine must be connected in accordance with the National Electric Code (NEC)
Article 422-4 - Ed-31, Except as provided for in NEC 90-4.
This machine must be properly grounded to avoid fatal electrical shock in the event of an
electrical malfunction. A ground connector screw should be fastened into the chassis to
facilitate supplemental grounding as permitted by NEC 250-91.
Do not connect any other equipment to the electrical circuit serving this unit.
Important!
THIS PRODUCT CAN CAUSE SERIOUS INJURY OR
DEATH IF NOT USED IN ACCORDANCE WITH THE
FOLLOWING SAFETY INSTRUCTIONS. WE CAN NOT
ANTICIPATE EVERY POSSIBLE CIRCUMSTANCE
THAT MIGHT INVOLVE A POTENTIAL HAZARD. THE
WARNINGS, CAUTIONS, DANGERS, AND SAFETY
SUGGESTIONS ARE THEREFORE NOT ALL INCLUSIVE.
AS THE OWNER YOU ARE RESPONSIBLE FOR THE
SAFE OPERATION OF THIS EQUIPMENT. ALWAYS
MAKE SURE THAT ANYONE USING THIS EQUIPMENT
HAS READ THIS MANUAL AND FOLLOWS THE SAFETY
WARNINGS TO HELP PREVENT THE POSSIBILITY
OF PERSONAL INJURY TO THE OPERATOR OR
ANYONE ELSE. IF ANY OPERATING PROCEDURE,
INSTALLATION, MAINTENANCE, OR WORK METHOD
NOT SPECIFICALLY RECOMMENDED IS USED, YOU
MUST SATISFY YOURSELF THAT IT IS SAFE FOR YOU
AND OTHER PERSONS. YOU MUST ALSO ENSURE
THAT THE PRODUCT WILL NOT BE DAMAGED OR
MADE UNSAFE BY THE PROCEDURE YOU CHOSE.
!
DANGER