Product Manual

15. Do not operate near ﬂ ammable or combustible materials.

This product is not intended for use in locations where ﬁ re or explosion hazards may

exist due to the presence of ﬂ ammable vapors, liquids or gases, or combustible dusts

or ﬁ bers.

Heat generated by the compression cycle and/or drive system is released into

the atmosphere and can cause materials in close proximity to reach their ﬂ ash

temperatures and ignite or explode.

Always operate the compressor in a well ventilated area.

Always store ﬂ ammable or combustible materials in a secure location away from all

open ﬂ ames, sparks, and heat sources.

16. Do not remove any air line or receiver connections before relieving air

pressure in the entire air system and receiver tank(s).

This machine is capable of producing extremely high pressures and/or

temperatures. The pressurized spray can cut exposed ﬂ esh like a knife. The

spray can also cause severe irritation, cuts and/or burns. It can inject air and/or

harmful particles and chemicals into the skin and other soft tissues, and this can

result in serious injury or death. To prevent this from happening, always relieve the

air pressure in the entire system and in the receiver tanks before removing any air

lines or receiver connections.

17. Do not operate at pressures, temperatures and rotational speeds in excess of

the manufacturers recommendations.

With safety in mind, the unit was designed and is tested to withstand speciﬁ c operating pressures,

temperatures, and volumes. The different components of the machine are matched to produce the

factory set operating pressure and volume. Any modiﬁ cation of these settings can cause damage to

the compressor and/or maintenance and operating personnel

Never make adjustments and/or parts substitutions to alter the factory set operating pressures,

temperatures, and volumes.

18. Do not spray ﬂ ammable or toxic liquids in conﬁ ned areas. Areas must be well

ventilated. Follow all manufacturers supplied instructions of the material to be

sprayed and the warnings associated with those products.

Never spray ﬂ ammable liquids in conﬁ ned areas. The ﬂ ammable vapors may

accumulate and then ignite causing an explosion. Always spray ﬂ ammable liquids in a

well ventilated area free from combustible materials, gasoline, or solvent vapors.

Never spray toxic liquids or chemicals in conﬁ ned areas. The toxic vapors may

accumulate and overcome the operator. Injury or death may result.

Read and follow all the safety instructions provided on the product label and Material